homeproductsservicesusage guidecontactlinks
homeproductsservicesusage guidecontactlinkslinks
R10 Flexible Chlorinated Polyolefin
2 to 1 Ratio
   
UL
  
VW-1 
  
CSA 
  
MIL SPEC
 
   
  Specification Reference
 
  
 
  
 
  
 
MIL-DTL-23053/1 Classes 1 & 2 MIL-R-46846
 
Type 1, Class 1
Repl
 aces
Raychem NT-FR
Remtek NT-120
3M/ECC NST
Alpha FIT-600
   
Description
 
 
 
 
Uses
 
   
 
 
Operating Temp
 
Shrink Temp
 
Standard Put-up
 
   
  R10 is a rubber-like, flame retarded chlorinated polyolefin heat-shrinkable tubing
  which meets all the requirements of Military Specifications MIL-DTL-23053/1
  Classes 1 and 2 and MIL-R-46846 Type 1, Class 1
   
  R10 is recommended for general purpose applications which require excellent
  abrasion and chemical resistance, such as diesel fuel environments. R10 has
  excellent properties at low temperatures.
   
  -75ºC, to +120ºC, and up to 200ºC, for short term durations.
  150ºC
  Spool
   
    Property (units)
Test Method
Test Method
Physical 
   Tensile Strength (psi)
ASTM D638
1500 MIN.
    Elongation (%)
ASTM D638
250 MIN.
    Specific gravity
ASTM D792
1.3 MAX.
    Low temp. flex (-75ºC)
MIL-DTL-23053
No Cracking
    Heat shock (200 C, 4 Hrs.)
MIL-DTL-23053
No Cracking
    Heat resistance, 150ºC, 168 Hrs, Elongation (%)
ASTM D638
200 MIN.
    Tensile Strength @ 200% elongation (psi)
ASTM D412
2500 MAX.
    Longitudinal change (%)
MIL-DTL-23053
+5, -10
     
Electrical
  Dielectric strength (volts/mil)
ASTM D876
300 MIN.
 
   Volume resistivity (ohm-cm)
ASTM D876
1.0 x 10 MIN
     
Chemical
  Corrosion (150 C, 16 Hrs.)
MIL-DTL-23053
No Corrosion
 
   Water absorption (%)
ASTM D570
1.0 MAX.
    Fluid resistance (23 C, 24 Hrs.)Tensile strength (psi)
MIL-DTL-23053
1000 MIN.
   
Flammability
MIL-DTL-23053
Pass
    Shrink Temperature (nominal)
150º

Inside
Post
Inside Diameter
Diameter
Shrink
Full
Before Shrinking
After
Wall
Spool
(minimum)
Shrinking
Thickness
Length
Price
Color Selection
(maximum)

mm


inches

mm
(inches)

mm
(inches)


in feet

per spool
per foot
BK
BR
RD
OR
YL
GN
BL
VI
GY
WH
CL
2.4
3/32 0.0938
1.190625 (0.04687)
0.6858 (0.027)
500
667.25
1.57
3.2
1/8
0.125
1.5748 (0.062)
0.6858 (0.027)
500
722.50
1.70
4.8
3/16 0.1875
2.3622 (0.093)
0.8382 (0.033)
200
353.60
2.08
6.4
1/4
0.250
3.175 (0.125)
0.889 (0.035)
200
440.30 2.59
9.5
3/8
0.375
4.7498 (0.187)
1.016 (0.040)
100
245.65
2.89
12.7
1/2
0.500
6.350 (0.250)
1.2192 (0.048)
100
277.95
3.27
15.9
5/8
0.625
8.001 (0.315)
1.2954 (0.051)
100
305.15
3.59
19.1
3/4
0.750
9.525 (0.375)
1.400 (0.057)
100
370.60
4.36
22.2
7/8
0.875
10.9982 (0.433)
1.651 (0.065)
100
439.45
5.17
25.4
1
1.000
12.700 (0.500)
1.778 (0.070)
100
554.20
6.52
31.8
1-1/4 1.250
15.875 (0.625)
2.032 (0.080)
100
725.05
8.53
38.1
1-1/2 1.500
19.05 (0.750)
2.032 (0.080)
100
983.45
11.57
44.5
1-3/4 1.750
22.225 (0.875)
2.413 (0.095)
100
1,183.20
13.92
50.8
2
2.000
25.4 (1.000)
2.413 (0.095)
100
1,359.15
15.99

 

Lead Time:
1 day

Lead Time:
up to 50 days

Lead Time:

up to 100 days

Lead Time:

up to 200 days

Not Possible
 


The above lead time guidelines are estimated only. They may be longer (not usually) or they may be shorter (typically). Regarding products with 100 & 200 day lead time; pricing may vary, and a
minimum order with deposit may be required. Oh... and by the way, everything can
change without notice and/or liability.