homeproductsservicesusage guidecontactlinks
homeproductsservicesusage guidecontactlinkslinks
K Withstands High Temps. and Abrasion
2 to 1 Ratio
Semi-Rigid Polyvinylidene Fluoride
   
UL
  
VW-1 
  
CSA 
  
MIL SPEC
 
   
  Specification Reference
 
 UL 224, 150ºC, 600V,
 
 VW-1 File E75077 YDTU2, CAT.NO Sumitube K
 
  
 
MIL-DTL-23053/8
   
Repl
 aces
Raychem Kynar™
Remtek PVF-175
3M/ECC Kynar™
Alpha FIT-350
   
Description
 
 
 
 
Uses
 
   
 
 
Operating Temp
 
Shrink Temp
 
Standard Put-up
 
   
  K is a highly flame-retardant tubing that is tough and abrasion resistant in
  mechanical environments. It has excellent properties for cut through and solvent
  resistance.
   
  K is recommended for applications for strain relieving components such as
  soldered connections and splices which are in high continuous operating temp.
  environments The material is good for applications where abrasion resistance
  is important.
  -55 C, to +175 C
  175ºC
  Bag 4 foot lengths, packaged in plastic bags.
   
    Property (units)
Test Method
Test Method
Physical 
   Tensile Strength (psi)
ASTM D638
5000 MIN
    Elongation (%)
ASTM D638
150 MIN.
    Specific gravity
ASTM D792
1.8 MAX.
    Low temp. flex (-55ºC)
MIL-DTL-23053
No Cracking
    Heat shock (300ºC, 4 Hrs.)
MIL-DTL-23053
No Cracking
    Heat resistance (250ºC, 168 Hrs.) Elongation (%)
ASTM D638
100 MIN.
    Secant modulus (psi)
ASTM D882
100000 MIN.
    Deformation (150 C, 1 hr)(%)
UL 224
50 MAX
    Longitudinal change (%)
MIL-DTL-23053
10
   
Electrical 
   Dielectric strength (volts/mil)
ASTM D876
800 MIN.
    Volume resistivity (ohm-cm)
ASTM D876
1.0 x 10MIN
   
Chemical 
   Copper mirror stability (180ºC, 168 Hrs.)
UL 224
70% of unaged
   

Elongation (%)
value min
    Water absorption (%)
ASTM D570
0.5 MAX
    Fluid resistance (23ºC, 24 Hrs.) Tensile
MIL-DTL-23053
.
   

strength (psi)
5000 MIN.
    Flammability
UL 224 VW-1
Pass
    Shrink Temperature (nominal)
175ºC

Inside
Post
Inside Diameter
Diameter
Shrink
Full
Before Shrinking
After
Wall
Spool
(minimum)
Shrinking
Thickness
Length
Price
Color Selection
(maximum)

mm


inches

mm
(inches)

mm
(inches)


in feet

per bag
per foot
BK
BR
RD
OR
YL
GN
BL
VI
GY
WH
CL
1.2
3/64 0.0469
0.5842 (0.023)
0.254 (0.010)
500
522.75
1.23
1.6
1/16 0.0625
0.7874 (0.031)
0.254 (0.010)
500
535.50
1.26
2.4
3/32 0.0938
1.1684 (0.046)
0.254 (0.010)
500
565.25
1.33
3.2
1/8 0.125
1.5748 (0.062)
0.254 (0.010)
500
607.75
1.43
4.8
3/16 0.1875
2.3622 (0.093)
0.254 (0.010)
200
396.10
2.33
6.4
1/4
0.250
3.175 (0.125)
0.3048 (0.012)
200
493.00
2.90
9.5
3/8
0.375
4.7498 (0.187)
0.3048 (0.012)
200
549.10
3.23
12.7
1/2
0.500
6.350 (0.250)
0.3048 (0.012)
100
388.45
4.57
15.9
5/8
0.625
7.9375 (0.3125)
0.4318 (0.017)
100
451.35
5.31
19.1
3/4
0.750
9.525 (0.375)
0.4318 (0.017)
100
714.00
8.40
25.4
1
1.000
12.700 (0.500)
0.4826 (0.019)
60
841.50
16.50
38.1
1-1/2 1.500
19.050 (0.750)
0.508 (0.020)
40
742.56
21.84
50.8
2
2.000
25.400 (1.000)
0.508 (0.020)
40
1,136.96
33.44

* Some types of heat shrink, for instance semi-rigid and dual wall types are manufactured in 4 foot lengths. the rigid and semi-rigid ones do not bend without kinking, the adhesives in dual walls tend to stick or block shut when spooled.

4 foot lenghts, packaged in plastic bags.

Lead Time:
1 day

Lead Time:
up to 50 days

Lead Time:

up to 100 days

Lead Time:

up to 200 days

Not Possible
 


The above lead time guidelines are estimated only. They may be longer (not usually) or they may be shorter (typically). Regarding products with 100 & 200 day lead time; pricing may vary, and a minimum order with deposit may be required. Oh... and by the way, everything can change
without notice and/or liability.