| I |
Flexible
Ionomer
2 to 1 Ratio |
|
Description
|
|
|
|
|
|
|
|
|
Uses
|
|
|
|
|
|
|
|
|
Operating
Temp
|
|
|
Shrink
Tpemp
|
|
|
Standard
Put-up
|
|
| |
|
|
| |
I
is a flexible, extremely tough, non-flame retarded, heat-shrinkable
ionomer tubing |
| |
which
is resistant to tearing, scuffing and abrasion. |
| |
|
| |
I
is recommended for applications requiring very light weight
and low profile tubing, |
| |
combined
with exceptional toughness. |
| |
|
| |
-55ºC,
to +105ºC. |
| |
110ºC |
| |
Spool |
| |
|
|
| |
|
Property
(units) |
Test
Method
|
Test
Method
|
|
Physical
|
|
Tensile
Strength (psi) |
ASTM
D638
|
4000
MIN.
|
| |
|
Elongation
(%) |
ASTM
D638
|
200
MIN.
|
| |
|
Specific
gravity |
ASTM
D792
|
1.00
MAX.
|
| |
|
Secant
Modulus |
ASTM
D882
|
6.0
x 104 MIN
|
| |
|
Low
temperature flex (-55ºC) |
MIL-DTL-23053
|
No
Cracking
|
| |
|
Longitudinal
change (%) |
MIL-DTL-23053
|
-20
MAX.
|
|
|
|
|
|
|
|
Electrical
|
|
Dielectric
strength (volts/mil) |
ASTM
D876
|
500
MIN.
|
|
Chemical
|
|
Volume
resistivity (ohm-cm) |
ASTM
D876
|
1.0
x 1016 MIN
|
|
|
|
|
|
|
|
|
|
Water
absorption (%) |
ASTM
D570
|
0.5
MAX.
|
|
|
|
Fluid
Resistance (23ºC, 24 Hrs.) |
ASTM
D570
|
|
|
|
|
Isopropyl
alcohol
|
|
|
|
|
|
Saline
solution
|
|
|
| |
|
Ethylene
glycol
|
|
|
| |
|
Tensile
Strength (psi) |
ASTM
D638
|
4000
MIN.
|
| |
|
Elongation
(%) |
ASTM
D638
|
20
MAX.
|
| |
|
Flammability |
|
N/A
|
| |
|
Shrink
Temperature (nominal) |
|
110ºC
|
|
|
|
Inside
|
Post
|
|
|
|
|
Inside
Diameter
|
Diameter
|
Shrink
|
Full
|
|
|
|
Before
Shrinking
|
After
|
Wall
|
Spool
|
|
|
|
(minimum)
|
Shrinking
|
Thickness
|
Length
|
Price
|
Color
Selection
|
|
|
(maximum)
|
|
|
|
|
|
mm
|
inches
|
mm
(inches)
|
mm
(inches)
|
in feet
|
per
spool
per foot
|
BK
|
BR
|
RD
|
OR
|
YL
|
GN
|
BL
|
VI
|
GY
|
WH
|
CL
|
| 1 |
-
0.039 |
0.500
(0.020) |
0.150
(0.006) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 |
-
0.079 |
1.000
(0.039) |
0.150
(0.006) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 |
-
0.118 |
1.500
(0.059) |
0.150
(0.006) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
-
0.157 |
2.000
(0.079) |
0.200
(0.008) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5 |
-
0.197 |
2.500
(0.098) |
0.200
(0.008)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PLEASE CALL FOR PRICING
AND AVAILABILITY
|
Lead Time:
1 day
|
Lead
Time:
up to 50 days
|
Lead
Time:
up
to 100 days
|
Lead
Time:
up
to 200 days
|
Not
Possible
|
|
The above lead
time guidelines are estimated only. They may be longer (not usually)
or they may be shorter (typically). Regarding products with 100 &
200 day lead time; pricing may vary, and a
minimum order with deposit may be required. Oh... and by the way,
everything can
change without notice and/or liability.
|
