homeproductsservicesusage guidecontactlinks
homeproductsservicesusage guidecontactlinkslinks
FE3 High Temperature
Solvent Resistant, Flame Retardant
2 to 1 Ratio
   
UL
  
VW-1 
  
CSA 
  
MIL SPEC
 
   
  Specification Reference
 
  
 
  
 
  
 
MIL-DTL-23053/13, MIL-R-46846, Type III, Class 1
   
Repl
 aces
Raychem Viton®
Remtek RV200
3M/ECC Viton
Alpha Fit-650
   

Description
  
 
 
 
Uses
 
   
Operating Temp
 
Shrink Temp
  
Standard Put-up
 
   
  FE3 is a rubber-like, highly fluid resistant, flame retardant flouro-elastomer heat-
  shrinkable tubing with high solvent resistance. FE3 is recommended for
  applications where resistance to aggressive solvents and high temperatures
  is required.
  Bundling, harnessing and environmental protection within engine compartments is
  one such application.
  -55ºC, to +200ºC, and up to 300ºC, for short periods.
  120 C
  Spool
   
    Property (units)
Test Method
Test Method
Physical 
   Tensile Strength (psi) ASTM D638 1200 MIN.
    Elongation (%) ASTM D638 250 MIN.
    Tensile Strength @ 200% elongation (psi) ASTM D412 2000 MAX.
    Heat shock (300ºC, 4 Hrs.) MIL-DTL-23053 No Cracking
    Heat resistance (250 C, 168 Hrs.) Elongation (%) ASTM D638 200 MIN.
    Longitudinal change (%) MIL-DTL-23053 -20 MAX.
    Cold Impact (-40ºC) ASTM D746 No Cracking
         
Electrical 
   Dielectric strength (volts/mil) ASTM D876 200 MIN.
  Volume resistivity (ohm-cm) ASTM D876 1.0 x 10
         
Chemical
   MIN Copper mirror corrosion (175ºC, 16 Hrs.) MIL-DTL-23053 No Corrosion
 
   Water absorption (%) ASTM D570 0.5 MAX.
    Fluid Resistance (23ºC, 24 Hrs.)    
   

Tensile Strength (psi)

MIL-DTL-23053 1200 MIN.
    Elongation (%) MIL-DTL-23053 250 MAX.
    Flammability MIL-DTL-23053 15 Sec.MAX.
    Shrink Temperature (nominal)   120ºC

Inside
Post
Inside Diameter
Diameter
Shrink
Full
Before Shrinking
After
Wall
Spool
(minimum)
Shrinking
Thickness
Length
Price
Color Selection
(maximum)

mm


inches

mm
(inches)

mm
(inches)


in feet

per spool
per foot
BK
BR
RD
OR
YL
GN
BL
VI
GY
WH
CL
3.2
1/8 0.125
1.5748 (0.062)
0.7874 (0.031)
100
1,210.40
14.24
4.8
3/16 0.1875
2.3622 (0.093)
0.889 (0.035)
100
1,063.35
12.51
6.4
1/4 0.250
3.175 (0.125)
0.889 (0.035)
100
966.45
11.37
9.5
3/8
0.375
4.7498 (0.187)
0.889 (0.035)
100
1,190.85
14.01
12.7
1/2
0.500
6.350 (0.250)
0.889 (0.035)
100
1,496.00
17.60
19.1
3/4
0.750
9.525 (0.375)
1.0668 (0.042)
100
2,144.55
25.23
25.4
1
1.000
12.70 (0.500)
1.2446 (0.049)
100
3,031.10
35.66

Other sizes available

Lead Time:
1 day

Lead Time:
up to 50 days

Lead Time:

up to 100 days

Lead Time:

up to 200 days

Not Possible
 


The above lead time guidelines are estimated only. They may be longer (not usually) or they may be shorter (typically). Regarding products with 100 & 200 day lead time; pricing may vary, and a
minimum order with deposit may be required. Oh... and by the way, everything can
change without notice and/or liability.