homeproductsservicesusage guidecontactlinks
homeproductsservicesusage guidecontactlinkslinks
F5N Ultra Low Shrink Temperature
2 to 1 Ratio
Flexible Polyolefin
   
UL
  
VW-1 
  
CSA 
  
MIL SPEC
 
  Specification Reference
 
 UL-224 125ºC, 600V, VW-1
 
 File E48762 YDUP2, Cat. No. SUMITUBE F5 or 863
 
 CSA-C22.2 No. 198-M1986 125ºC, 600V, File
 
LR33298, Guide 400-U-9
Replaces
No Equivalent Available
 
 
 

Description
  
 
 
 
Uses
  
 
 
 
Operating Temp
 
Shrink Temp
  
Standard Put-up
  
  No Equivalent Available F5N is a very flexible, very low recovery temperature, heat-
  shrinkable polyolefin tubing that is highly flame retardant. F5N is UL VW-1
  recognized. It is also certified by the CSA.
   
  F5N is recommended for all general purpose commercial applications such as
  insulating, color coding, bundling and light harness jacketing or environmental
  protection where UL or CSA recognition and VW-1 and OFT ratings
  and low shrink temperature are important.
  -55ºC, to +125ºC
  80ºC
  Spool
    Property (units)
Test Method
Test Method
Physical 
   Tensile Strength (psi)
UL 224
1500 MIN.
    Elongation (%)
UL 224
200 MIN.
    Specific gravity
ASTM D792
1.35 MAX.
    Low temp. flex (-55ºC)
MIL-DTL-23053
No Cracking
    Heat resistance, (158ºC, 168 Hrs,)
   

Elongation (%)
UL 224
100 MIN.
    Secant modulus (psi)
ASTM D882
25000 MAX.
    Deformation (% @ 125ºC, 1 hr)
UL 224
50 MAX.
    Longitudinal change (%)
MIL-DTL-23053
5
     
Electrical 
   Dielectric strength (volts/mil)
UL 224
2500 MIN.
    Volume resistivity (ohm-cm)
UL 224
1.0 x 10 MIN
     
Chemical 
   Corrosion
UL 224
No Corrosion
    Copper mirror stability (158ºC, 168 Hrs.)
   

Elongation (%)
UL 224
100 MIN
    Water absorption (%)
ASTM D570
0.5 MAX.
    Fluid Resistance (23ºC, 24 Hrs.)
   

Tensile Strength (psi)

MIL-DTL-23053
1000 MIN.
    Flammability Shrink
UL 224 VW-1
Pass
    Temperature (nominal)
80ºC
Inside
Post
Inside Diameter
Diameter
Shrink
Full
Before Shrinking
After
Wall
Spool
(minimum)
Shrinking
Thickness
Length
Price
Color Selection
(maximum)

mm


inches

mm
(inches)

mm
(inches)


in feet

per spool
per foot
BK
BR
RD
OR
YL
GN
BL
VI
GY
WH
CL
1.2
3/64 0.0469
0.5842 (0.023)
0.4064
(0.016)
1000
357.00
0.42
1.6
1/16 0.0625
0.7874 (0.031)
0.4318
(0.017)
1000
365.50
0.43
2.4
3/32 0.0938
1.1684 (0.046)
0.508
(0.020)
500
191.25
0.45
3.2
1/8
0.125
1.5748 (0.062)
0.508
(0.020)
500
204.00
0.48
4.8
3/16 0.1875
2.3622 (0.093)
0.508
(0.020)
200
98.60
0.58
6.4
1/4
0.250
3.175 (0.125)
0.635
(0.025)
200
122.40
0.72
9.5
3/8
0.375
4.7498 (0.187)
0.635
(0.025)
200
137.70
12.7
1/2
0.500
6.350 (0.250)
0.635
(0.025)
200
158.10
0.93
19.1
3/4
0.750
9.525 (0.375)
0.762
(0.030)
200
210.80
1.24
25.4
1
1.000
12.700 (0.500)
0.889
(0.035)
200
316.20
1.86


Color Note: Teal is in stock in 3/16" & 1/2"

Lead Time:
1 day

Lead Time:
up to 50 days

Lead Time:

up to 100 days

Lead Time:

up to 200 days

Not Possible
 


The above lead time guidelines are estimated only. They may be longer (not usually) or they may be shorter (typically). Regarding products with 100 & 200 day lead time; pricing may vary, and a minimum order with deposit may be required. Oh... and by the way, everything can change without notice and/or liability.