homeproductsservicesusage guidecontactlinks
homeproductsservicesusage guidecontactlinkslinks
F2 F2 Flexible Polyolefin
2 to 1 Ratio
   
UL
  
VW-1 
  
CSA 
  
MIL SPEC
 
  Specification Reference
 
 UL 224 125ºC, 600V
 
 VW1, File E48762 YDPU2, Cat. No. SUMITUBE F2
 
  
 
 
Repl
 aces
ALPHA FIT-221
VERSAFIT (RT-1136)
3M FP-301
   

Description
  
 
 
 
Uses
  
 
 
 
Operating Temp
 
Shrink Temp
  
Standard Put-up
  
Marking
  
   
  F2 is a very flexible, low recovery temperature, flame-retardant, heat-shrinkable
  polyolefin tubing that is recognized by Underwriters' Laboratories (UL)
  under Subject 224 as UL VW-1, and the Canadian Standards
  Association (CSA) at 125ºC.
  F4 is recommended for all general purpose applications such as insulating,
  color coding, bundling and light harness jacketing or environmental protection
  where UL or CSA recognition as VW-1 rated material is desirable
   
  -55ºC, to +125ºC
  90ºC
  Spool
  Sumitube F2 is surface printed with recognized UL and CSA marking as follows:
  "SUMITOMO-K CSA HS X PO TUBING 125ºC SUMITUBE F2 VW-1-F"
    Property (units)
Test Method
Test Method
Physical 
   Tensile Strength (psi)
UL 224
1500 MIN.
    Elongation (%)
UL 224
200 MIN.
    Specific gravity
ASTM D792
1.35 MAX.
    Low temp. flex (-55ºC)
MIL-DTL-23053
No Cracking
    Heat resistance, (158ºC, 168 Hrs,)
   

Elongation (%)
UL 224
100 MIN.
    Secant modulus (psi)
ASTM D882
25000 MAX.
    Deformation (% @ 125ºC, 1 hr)
UL 224
50 MAX.
    Longitudinal change (%)
MIL-DTL-23053
5
     
Electrical 
   Dielectric strength (volts/mil)
UL 224
2500 MIN.
    Volume resistivity (ohm-cm)
UL 224
1.0 x 10 MIN
     
Chemical 
   Corrosion
UL 224
No Corrosion
    Copper mirror stability (158ºC, 168 Hrs.)
    Elongation (%)
UL 224
100 MIN.
    Water absorption (%)
ASTM D570
0.5 MAX.
    Fluid Resistance (23ºC, 24 Hrs.)
   

Tensile Strength (psi)

MIL-DTL-23053
1000 MIN.
    Flammability UL 224 VW-1 Pass
    ShrinkTemperature (nominal)   90ºC

Inside
Post
Inside Diameter
Diameter
Shrink
Full
Before Shrinking
After
Wall
Spool
(minimum)
Shrinking
Thickness
Length
Price
Color Selection
(maximum)

mm


inches

mm
(inches)

mm
(inches)


in feet

per spool
per foot
BK
BR
RD
OR
YL
GN
BL
VI
GY
WH
CL
1.2
3/64 0.046
0.600 (0.023)
0.400 (0.027)
1000
1.6
1/16 0.063
0.800 (0.031)
0.430 (0.027)
1000
2.4
3/32 0.093
1.200 (0.046)
0.510 (0.033)
500
3.2
1/8
0.125
1.600 (0.062)
0.510 (0.035)
500
4.8
3/16 0.187
2.400 (0.093)
0.510 (0.040)
200
6.4
1/4
0.250
3.200 (0.125)
0.640 (0.048)
200
9.5
3/8
0.375
4.800 (0.178)
0.640 (0.051)
200
12.7
1/2
0.500
6.400 (0.250)
0.640 (0.057)
200
19.1
3/4
0.750
9.500 (0.375)
0.760 (0.065)
200
25.4
1
1.000
12.700 (0.500)
0.890 (0.070)
200
38.4
1-1/2 1.500
19.100 (0.750)
1.020 (0.080)
200
50.8
2 2.000
25.400 (1.000)
1.140 (0.080)
100


PLEASE CALL FOR PRICING AND AVAILABILITY

Lead Time:
1 day

Lead Time:
up to 50 days

Lead Time:

up to 100 days

Lead Time:

up to 200 days

Not Possible
 


The above lead time guidelines are estimated only. They may be longer (not usually) or they may be shorter (typically). Regarding products with 100 & 200 day lead time; pricing may vary, and a
minimum order with deposit may be required. Oh... and by the way, everything can
change without notice and/or liability.