homeproductsservicesusage guidecontactlinks
homeproductsservicesusage guidecontactlinkslinks
D Commercial Grade Semi-Rigid Polyolefin
2 to 1 Ratio
   
UL
  
VW-1 
  
CSA 
  
MIL SPEC
 
   
  Specification Reference
 
  
 
  
 
  
 
MIL-DTL-23053/6 Class 2 except
  longitudinal change
Repl
 aces
Alpha FIT-295
Raychem CRN
   
   

Description
  
 
 
Uses
 
 
   
Operating Temp
 
Shrink Temp
  
Standard Put-up
 
   
  D is a lightweight, semi-rigid, heatshrinkable polyolefin tubing which has excellent
  mechanical strength with good electrical properties and chemical resistance.
   
  D should be considered in applications where strain relief, mechanical strength or
  abrasion resistance is a factor. Examples would be in protecting solder or crimped
  wire terminations on light wire harnesses
  -55ºC, to +135ºC
  130ºC
  Bag 4 foot lengths, packaged in plastic bags.
   
    Property (units)
Test Method
Test Method
Physical 
   Tensile Strength (psi) ASTM D638 2000 MIN.
    Elongation (%) ASTM D638 200 MIN.
    Specific gravity ASTM D792 1.0 MAX.
    Low temp. flex (-55ºC) MIL-DTL-23053 No Cracking
    Heat resistance, (175ºC, 168 Hrs,) Elongation (%) ASTM D638 100 MIN.
    Secant modulus (psi) ASTM D882 2.5 x 10 MIN
  Longitudinal change (%) MIL-DTL-23053 +5, -10
         
Electrical
   Dielectric strength (volts/mil) ASTM D638 500 MIN.
 
   Volume resistivity (ohm-cm) ASTM D638 1.0 x 10 MIN
         
Chemical 
   Corrosion (175ºC, 16 Hrs.) MIL-DTL-23053 No Corrosion
  Water absorption (%) ASTM D570 1.0 MAX.
    Fluid Resistance (23ºC, 24 Hrs.)    
   

Tensile Strength (psi)

 MIL-DTL-23053 1600 MIN.
    Flammability   N/A
    Shrink Temperature (nominal)   130ºC
         
         

Inside
Post
Inside Diameter
Diameter
Shrink
Full
Before Shrinking
After
Wall
Spool
(minimum)
Shrinking
Thickness
Length
Price
Color Selection
(maximum)

mm


inches

mm
(inches)

mm
(inches)


in feet

per bag
per foot
BK
BR
RD
OR
YL
GN
BL
VI
GY
WH
CL
1.2 3/64 0.046 0.600 (0.23) 0.510 (0.020) 500  
1.6 1/16 0.063 0.800 (0.031) 0.510 (0.020) 500  
2.4 3/32 0.093 1.200 (0.046) 0.510 (0.020) 500  
3.2 1/8
0.125		 1.600 (0.062) 0.510 (0.020) 500  
4.8 3/16 0.187 2.400 (0.093) 0.640 (0.025) 200  
6.4 1/4 0.
250		 3.200 (0.125) 0.640 (0.025) 200  
9.5 3/8
0.375		 4.800 (0.187) 0.760 (0.030) 200  
12.7 1/2
0.500		 6.400 (0.250) 0.890 (0.035) 100  

PLEASE CALL FOR PRICING AND AVAILABILITY

 * Some types of heat shrink, for instance semi-rigid and dual wall types are manufactured in 4 foot lengths. the rigid and semi-rigid ones do not bend without kinking, the adhesives in dual walls tend to stick or block shut when spooled.

4 foot lenghts, packaged in plastic bags.

Lead Time:
1 day

Lead Time:
up to 50 days

Lead Time:

up to 100 days

Lead Time:

up to 200 days

Not Possible
 


The above lead time guidelines are estimated only. They may be longer (not usually) or they may be shorter (typically). Regarding products with 100 & 200 day lead time; pricing may vary, and a
minimum order with deposit may be required. Oh... and by the way, everything can
change without notice and/or liability.